Refer to our UniFi Device LED Status guide to ensure the device is in a factory-default state.The Cloud Console can leverage your UniFi Network Mobile App ( iOS / Android) to enhance your 元 adoption experience. 元 Adoption Methods UniFi Network Mobile App (Cloud Console only) The LAN to which your devices are connected should have Internet access.Your WAN port is connected to the Internet.This is only recommended for advanced users, or those adopting devices to the UniFi Cloud Console. You may need to leave the Devices page and return to see this reflected on the screen.Layer 3 adoption is the process of adopting a UniFi device to a remote UniFi Network Application. After a few moments, the devices will now be managed by the Controller and will appear as Connected.There is no need to wait for step 4 to finish. Perform step 2 again, setting the inform URL again.You’ll see it going to “Adopting” state, ignore it as it’ll eventually become “Adoption Failed” or “Disconnected”. Open a browser to your UniFi Network Controller and you should see the device is “Pending Approval” in the Devices screen.Click “manage”, modify the inform URL and leave the SSH username/password as ubnt/ubnt and click “Apply”.If unsure about device authentication credentials, please take a look at this article: UniFi – Accounts and Passwords for Controller, Cloud Key and Other Devices. If the device is not in a default state (new out of the box, or reset to its factory default settings), click “reset”, specify the SSH username/password and click “Apply”. Launch the Discovery Utility and wait until the device appears.To perform 元 adoption with the Discovery utility:

Unifi discovery chrome